The DMC Inc. guest blog series wraps up with Part 3—as project engineer Natalie Pippolo explores the PLC functionality of a groov EPIC controller.

Did you know groov EPIC includes several programming options like PAC Control, Node-RED and CODESYS? 

In Part 3 of the DMC Engineering's guest blog, Natalie Pippolo returns to show you how to develop a simple program using CODESYS on groov EPIC.

Follow along as she walks you through each step of the configuration.

Follow along with Part 2 of the DMC Inc. guest blog series as Natalie Pippolo demonstrates configuring Ignition Edge—installed on every groov EPIC controller.

Are you curious how Ignition Edge software works on groov EPIC and what types of applications it's useful for?

DMC's project engineer Natalie Pippolo returns this week with part 2 of her 3-part guest blog series here on the OptoBlog.

Follow along as she walks you through her experience with configuring Ignition Edge on groov EPIC:

DMC Inc. offers a unique experience and perspective on the groov EPIC system in the first of a three part guest blog series.

Opto 22's groov EPIC (Edge Programmable Industrial Controller) is more than just a modern PLC. With an embedded Linux operating system, the groov EPIC processor supports a wide array of platforms for programming, visualization, and more at the network's edge.

For a complete overview of the groov EPIC and its features, you'll want to check out this three part guest blog series from Natalie Pippolo of DMC, Inc.