Do what when:
In last week’s blog we covered how to set the real time clock (RTC) in a PAC Controller with an accurate time server over the Internet using SNTP.Now that our controller knows exactly what time it is, how do we turn on that pump at 6:00 a.m. on the dot?
Like most aspects of programming, there are a few different ways to achieve the same result, so join me in this week’s blog while we look at one way to manage real-time scheduling.
Topics: Energy management, Process control, groov, Internet of Things, Tips, IoT, PACs, PAC Project
Do you know what time it is? Does your SNAP PAC controller know what time it is? Are they the same time? Who’s right?
In this week's blog we are going to talk about this big ball of wibbly wobbly timey wimey stuff.… No, not time travel, but actual time…. Specifically how to set your PAC Controller to the current time.
No reading ahead; remember, time flies like an arrow and fruit flies like a banana.
Topics: Internet of Things, PLCs, IoT, PACs, OEM, Networking, PAC Project
It is amazing how sometimes similar applications can come back to back….Last week's blog came from a customer asking how to measure the main power grid frequency. And later the same week I had a totally different customer ask me about how he could display upper, lower and current value of the main electrical grid frequency in groov. What are the chances of that!!??
This customer wanted one gadget to display all three values. Why so dense? Because they only use groov on smart phones, no PCs or Tablets. He was polling the data from a bank of UPSes and so needed to display a lot of data. Screen real estate is prime on those devices. What can we do to help?
In this week's blog, we are going to have some adventures in Z-Order.
Topics: Energy management, groov, Internet of Things, Remote monitoring, Tips, IoT, PACs, OEM, I/O
Measure the main power grid frequency, he said. It will be fun, he said…. Actually, pretty sure I said something like, “it will be easy”... and I was mostly right, and best of all, it did turn out to be fun!
It seemed like both a reasonable and easy request. The requirements were to measure the mains power grid frequency to a resolution of 0.01 Hertz, and to do it every 125 milliseconds (roughly; it could be a max of 200 milliseconds, but not much longer).
Why? In this case, the chase is better than the catch. It's enough to say the customer had his reasons, and this blog is about the chase.
Topics: Energy management, Process control, groov, Internet of Things, Remote monitoring, Electronics, Tips, IoT, OEM, I/O
We rely on our smartphones so much now. It's hard to remember when I couldn't instantly:
So seriously, why would I want that convenience to stop with my personal life?
What I'd like is to also see status and data from equipment and systems I'm responsible for, and especially to be notified if something's out of line.
Topics: Energy management, Process control, Discrete control, groov, Internet of Things, Remote monitoring, optonews, OptoNews 2015-07-15
Star Struck:
From a young age I have been looking up at night. Not sure exactly when I fell in love with astronomy, but I can recall looking up at the stars every chance I got as a kid.
I have ebbed and flowed with the amount of time and equipment I have had to spend on the hobby. In Australia I had a fully enclosed fiberglass domed observatory, which I chose to not ship over when my family moved to The States, but the desire to look up has not gone away.
Only the constellations at the horizon can be seen in both hemispheres, and even those look upside down compared to what I used to see. So I wanted to get something up and running fast here that would allow me some time to get my bearings in the sky and to share my new stars with my mates back in Australia via my personal website.
In this week's blog, I would like to share what astronomy tools I currently have set up, thanks to some Opto 22 hardware and groov.
Topics: Videos, Process control, Discrete control, groov, Internet of Things, Remote monitoring, Electronics, Tips, IoT, PACs
Layers of security:
I wish there were, but there just isn’t.... There is no one device, hardware, or software that is the single defense for all known and future network attack vectors—including the one critical weakness: humans. You know, some thing or device that you could simply put at your network's front door and have it reject all the bad guys, but allow the friendlies in without question. Secure and easy is still a wish.
The solution then really comes down to layers. Adding layers that each will take a lot of time and a lot of effort to peel back, so much so that most attackers simply give up and move on.
The past few blog posts have talked about some of those layers, so let's now put it all together and see just how we might go about building a very robust mobile-accessible industrial automation network.
Topics: Process control, Discrete control, groov, Internet of Things, PLCs, Remote monitoring, Electronics, Tips, IoT, Machine builder, PACs, OEM, Integrators, Networking
Would you like to view critical plant status from anywhere on the Internet?
Are you worried that if you connect your automation network to your company’s IT network (which is likely connected to the Internet), the wrong people could access your control system? Or that traffic like YouTube might impact your automation network throughput?
There are a lot of advantages and only a few disadvantages to segmenting your IT (Information Technology) network from your OT (Operational Technology, in other words your controls) networks. While there are a few different ways to segment networks, in this blog we are going to look at separating them using one of two Opto 22 products: SNAP PAC Controllers and groov.
Topics: Process control, groov, Internet of Things, Electronics, IoT, Machine builder, PACs, Networking
Two keys for secure communications:
What are SSL/TLS and HTTPS? You may have heard them being used on the Internet, and you have more than likely used them when logging into your bank, but what are they?
Is there anything you need to do to use these secure protocols?
What goes on "behind the curtain" in your web browser when you use them?
In this week's blog we are going to continue the theme of network security by taking a close look at SSL/TLS and HTTPS.
Topics: Discrete control, groov, Internet of Things, Remote monitoring, Electronics, Tips, IoT, Machine builder, Integrators, Networking
Mobile device use - Russian Roulette or the new normal?
Many of us have a either a smartphone or tablet, and some of us have both. We use them for all sorts of tasks every day. Are we simply pushing our luck? Are we rolling the dice every time we use them? Or can we use them in a secure manner that helps us be more productive and thus have a higher quality of life?
This week's blog is going to look at some pros and cons of the humble mobile device and what steps we can take to even out the odds.
Topics: groov, Internet of Things, Remote monitoring, Electronics, Tips, IoT, Networking